Get a quoteD1 Dozer
Work Looks Better from Here
More Comfort – More Performance – More Versatility
-
Easy to Operate
GRADE with 3D and Slope Assist™ help achieve the best quality grading results, while new technologies make machine operation easier and more efficient.
-
Up to 10% Lower Total Ownership Cost
with improved fuel economy, long undercarriage life and easy maintenance.
-
Up to 15% More Performance
with customizable operator settings, improvements in grade control features and optimum machine balance for smooth, fast finish grading.
Engine
| Displacement | 220 inÂł |
| Engine Model | Cat C3.6 |
| Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 | 80 hp |
| Net Power - 2,200 rpm - SAE J1349 | 80 hp |
| Note (1) | Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. |
| Note (2) | All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. |
| Power - Net | 80 hp |
Engine
| Power Train | Hydrostatic |
Weights
| Note (1) | Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. |
| Note (2) | For machine with ripper, add 554 kg (1,222 lb). |
| Operating Weight | 17855 lb |
| Operating Weight - LGP | 18839 lb |
| Operating Weight - LGP, 762 mm/30 in | 19295 lb |
Cab
| FOPS | ISO 3449:2005 Level II |
| ROPS | ISO 3471:2008 |
Transmission
| Drive Pumps | 1 |
| Maximum Travel Speed - Forward | 5.6 mile/h |
| Maximum Travel Speed - Reverse | 6.2 mile/h |
| Relief Valve Settings | 7033 psi |
| Track Motors | 2 |
Undercarriage
| Ground Pressure - LGP | 4.3 psi |
| Ground Pressure - LGP, 762 mm (30 in) | 3.7 psi |
| Length - Track on Ground - LGP | 89 in |
| Length - Track on Ground - LGP, 762 mm (30 in) | 89 in |
| Number of Rollers - Each Side | 6 |
| Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage | 43 |
| Shoe Width - LGP | 25 in |
| Shoe Width - LGP, 762 mm (30 in) | 30 in |
| Shoe Width - Standard | 16 in |
| Track Gauge | 59 in |
| Track Gauge - LGP | 68 in |
| Track Gauge - LGP, 762 mm (30 in) | 73 in |
Undercarriage
| Ground Pressure | 6.45 psi |
| Length of Track on Ground | 89 in |
| Number of Shoes - Each Side - Abrasion Undercarriage | 38 |
Service Refill Capacities
| Cooling System | 4.2 gal (US) |
| Crankcase - With Filter | 2.8 gal (US) |
| Diesel Exhaust Fluid (DEF) Tank | 4.9 gal (US) |
| Final Drive - Each - LGP | 2.6 gal (US) |
| Fuel Tank | 51.5 gal (US) |
| Transmission - Hydraulic Tank | 23.8 gal (US) |
Service Refill Capacities
| Final Drives - Each Side | 2.6 gal (US) |
Hydraulic Controls
| Pump Output | 17.2 gal/min |
| Relief Valve Settings | 2988 psi |
Ripper
| Height | 6.5 in |
| Maximum Digging Depth | 13.3 in |
| Maximum Ground Clearance Under Tip | 17.6 in |
| Maximum Reach - Ground Line | 30.2 in |
| Number of Shanks | 3 |
| Overall Width | 67.3 in |
| Type | Parallelogram |
| Weight | 1222 lb |
Air Conditioning System
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
Dimensions
| BLADE: Blade Capacity (SAE) - LGP | 2.17 ydÂł |
| BLADE: Blade Cutting Edge Angle, Adjustable - LGP | 52° to 58° |
| BLADE: Blade Height - LGP | 33.8 in |
| BLADE: Blade Lift Height - LGP | 28.7 in |
| BLADE: Blade Width - LGP | 124 in |
| BLADE: Blade Width at Maximum Angle - LGP | 113.1 in |
| BLADE: Digging Depth - LGP | 23 in |
| BLADE: Maximum Angle (either side) - LGP | 25° |
| BLADE: Maximum Tilt - LGP | 17.2 in |
| Dozer Height - LGP | 108.9 in |
| Dozer Height - LGP, 762 mm (30 in) | 108.9 in |
| Dozer Height - Standard | 108.9 in |
| Ground Clearance - LGP | 13 in |
| Ground Clearance - LGP, 762 mm (30 in) | 13 in |
| Length of Basic Dozer (without blade) - LGP | 129.6 in |
| Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) | 129.6 in |
| Length of Basic Dozer (without blade) - Standard | 129.6 in |
| Note | *Abrasion Undercarriage |
| Overall Length - With Blade - LGP | 167.8 in |
| Overall Length - With Blade - LGP, 762 mm (30 in) | 167.8 in |
| Track Gauge - LGP | 67.9 in |
| Track Gauge - LGP, 762 mm (30 in) | 73 in |
| Width of Dozer (standard shoes, no blade) - LGP | 92.9 in |
| Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) | 94.9 in |
| Width of Dozer (standard shoes, no blade) - Standard | 74.8 in |
Dimensions
| BLADE: Blade Capacity (SAE) - Standard | 1.99 ydÂł |
| BLADE: Blade Cutting Edge Angle, Adjustable - Standard | 52° to 58° |
| BLADE: Blade Height - Standard | 35.8 in |
| BLADE: Blade Lift Height - Standard | 28.7 in |
| BLADE: Blade Width - Standard | 104.2 in |
| BLADE: Blade Width at Maximum Angle - Standard | 95.2 in |
| BLADE: Digging Depth - Standard | 23.2 in |
| BLADE: Maximum Angle (either side) - Standard | 25° |
| BLADE: Maximum Tilt - Standard | 14.5 in |
| Ground Clearance - Standard | 13 in |
| Note | With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in) |
| Overall Length - With Blade - Standard | 168 in |
| Track Gauge - Standard | 58.9 in |
Retrieval Winch
| Control | Hydraulic |
| Drum Capacity - Optional Cable | 195 ft |
| Drum Capacity - Recommended Cable | 277 ft |
| Drum Diameter | 8 in |
| Drum Width | 9.65 in |
| Maximum Line Pull - Bare Drum | 50 ft/min |
| Maximum Line Pull - Full Drum | 79 ft/min |
| Maximum Line Speed - Bare Drum | 32150 lb |
| Maximum Line Speed - Full Drum | 20350 lb |
| Overall width | 27.91 in |
| Rope Diameter - Optional | 0.75 in |
| Rope Diameter - Recommended | 0.63 in |
| Speed | Variable |
| Throat Clearance | 5.6 in |
| Weight | 1747 lb |
| Winch Drive | Hydraulic |
| Winch Length | 35.63 in |
High Performance Winch
| Control | Hydraulic |
| Drum capacity – optional | 256 ft |
| Drum capacity – recommended cable | 371 ft |
| Drum diameter | 10 in |
| Drum width | 10.8 in |
| Maximum line pull – bare drum | 40000 lb |
| Maximum line pull – full drum | 25000 lb |
| Maximum line speed – bare drum | 131 ft/min |
| Maximum line speed – full drum | 207 ft/min |
| Overall width | 29.2 in |
| Rope diameter – optional | 0.75 in |
| Rope diameter – recommended | 0.63 in |
| Speed | Variable |
| Throat clearance | 6.75 in |
| Weight | 1345 lb |
| Winch drive | Hydrostatic |
| Winch length | 27.76 in |