A LOOK AT THE VERMEER BPX9010 BALE PROCESSOR
VERMEER BPX9010 BALE PROCESSOR
The Vermeer BPX9010 bale processor combines simplicity, durability and versatility – an all-around processor ready to perform a variety of applications. Distribute a consistent, uniform windrow of crop along the bunk line or out in the pasture. Or spread bedding with consistency and accuracy that ranges up to 50 ft. The BPX9010 bale processor simplifies the process of processing bales.
GET A QUOTE TODAY!
SPECIFCATIONS
-
WORKING WIDTH
11.2'
-
MINIMUM PTO HORSEPOWER
85 HP
-
RECOMMENDED PTO HORSEPOWER
100 HP
-
MAXIMUM PTO HORSEPOWER
210 HP
-
BALE SIZE CAPACITY
2 bales, 6' x 5'
-
BALE WEIGHT CAPACITY
2500 lbs
FEATURES
-
ADJUSTABLE ROTOR CLEANER
Weldment attached to the cut control bars to help manage build-up of net or twine left on the rotor and assists in minimizing the amount of net or twine in the feed.
-
BALE LIFT SYSTEM AND FRAME
T-style frame with heavy-duty feed system. This makes it more efficient to load bales and help reduce stress on the machine. Plus, the robust T-style tongue frame has no welds or gussets at high stress points and is bolted high on the tub, helping enhance durability.
-
DIRECT DRIVE SYSTEM
Power distributed through two gearboxes. The design allows operators to expect less maintenance and helps increase durability and efficiency when compared to chain or belt driven processors.
-
OFFSET ROTOR
Rotates and pulls material through for more consistent feeding and helps prevent uncontrolled fall-through from slowing down the machine.
-
RIGHT-SIDE DISCHARGE
Discharge located on the same side as tractor hydraulic controls gives the operator more visibility.
-
RUBBER CURTAIN
Rubber curtain at the backside of the machine and at discharge. The unique rubber curtain helps minimize spillage from the back of the machine, with the ability to consistently feed over a 32" feed bunk wall. The curtain can be raised to broadcast up to 50.'
-
SLAT AND CHAIN BED
The slat and chain bale rotation design feeds bales more consistently into the rotor, reducing the need for reverse rotation. Heavy-duty sprockets and chains allow mis-shaped bales to be processed smoothly. Long-lasting bushings replace bearings. Split shafts let you perform maintenance without removing the entire bed.
*New Vermeer products are only sold at our Pierre, SD., Rapid City, SD., Chadron, NE., Pickrell, NE., and Fremont, NE., locations.