Engine
|
Biodiesel Capability
|
Up to B20¹
|
|
Bore
|
4.1 in
|
|
Displacement
|
268.5 in³
|
|
Emissions
|
Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards.
|
|
Engine Model
|
Cat® C4.4
|
|
Engine Power - ISO 14396 (DIN)
|
176 hp (metric)
|
|
Engine Power - ISO 14396:2002
|
174 hp
|
|
Net Power - ISO 9249
|
171 hp
|
|
Net Power - ISO 9249 (DIN)
|
174 hp (metric)
|
|
Note (1)
|
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
|
|
Note (2)
|
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
|
|
Stroke
|
127 mm
|
Hydraulic System
|
Main System - Maximum Flow - Implement
|
67 gal/min
|
|
Maximum Pressure - Implement Circuit - Heavy Lift
|
5366 psi
|
|
Maximum Pressure - Implement Circuit - Normal
|
5076 psi
|
|
Maximum Pressure - Implement Circuit - Travel Circuit
|
5076 psi
|
Swing Mechanism
|
Maximum Swing Torque
|
32560 ft·lbf
|
|
Swing Speed
|
9.4 r/min
|
Machine Weight
|
Operating Weight Maximum
|
46407 lb
|
|
Operating Weight Minimum
|
41888 lb
|
Service Refill Capacities
|
Cooling System
|
35 l
|
|
Diesel Exhaust Fluid (DEF)
|
5.3 gal (US)
|
|
Fuel Tank
|
76.6 gal (US)
|
|
Hydraulic System - Including Tank
|
74 gal (US)
|
|
Hydraulic Tank
|
31.7 gal (US)
|
Transmission
|
Creeper Speed - 1st Gear
|
3.4 mile/h
|
|
Creeper Speed - 2nd Gear
|
9.3 mile/h
|
|
Drawbar Pull
|
23380 lbf
|
|
Forward/Reverse - 1st Gear
|
6.2 mile/h
|
|
Forward/Reverse - 2nd Gear
|
21.7 mile/h
|
|
Maximum Travel Speed
|
21.7 mile/h
|
Dimensions
|
Boom
|
VA 5.2 m (17'1")
|
|
Bucket
|
GD 0.91 m³ (1.19 yd³ )
|
|
Counterweight Clearance
|
4.25 ft
|
|
Ground Clearance
|
1.4 ft
|
|
Shipping Height - Top of Cab
|
10.7 ft
|
|
Shipping Length
|
26.6 ft
|
|
Stick
|
2.5m (8'2")
|
|
Support Point
|
11.6 ft
|
|
Tail Swing Radius
|
6.25 ft
|
|
Undercarriage Length
|
16.6 ft
|
|
Wheel Base
|
8.8 ft
|
Working Ranges and Forces
|
Boom Type
|
VA 5.2 m (17'1")
|
|
Bucket
|
GD 0.91 m³ (1.19 yd³ )
|
|
Bucket Forces (ISO)
|
26752 lbf
|
|
Cutting Height
|
35.2 ft
|
|
Digging Height
|
18.9 ft
|
|
Dump Height
|
25.6 ft
|
|
Reach at Ground Level
|
30.2 ft
|
|
Stick
|
2.5m (8'2")
|
|
Stick Forces (ISO)
|
16861 lbf
|
|
Vertical Wall Digging Depth
|
14.6 ft
|
Air Conditioning System
|
Note
|
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes.
|
