Engine
|
Biodiesel Capability
|
Up to B20¹
|
|
Bore
|
4.1 in
|
|
Displacement
|
427.8 in²
|
|
Emissions
|
Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards.
|
|
Engine Model
|
C 7.1
|
|
Engine Power - ISO 14396
|
174 hp
|
|
Engine Power - ISO 14396 (DIN)
|
176 hp (metric)
|
|
Net Power - ISO 9249
|
171 hp
|
|
Net Power - ISO 9249 (DIN)
|
174 hp (metric)
|
|
Note (1)
|
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
|
|
Note (2)
|
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
|
|
Stroke
|
5.3 in
|
Hydraulic System
|
Main System - Maximum Flow - Implement
|
95 gal/min
|
|
Maximum Pressure - Implement Circuit - Heavy Lift
|
5366 psi
|
|
Maximum Pressure - Implement Circuit - Normal
|
5076 psi
|
|
Maximum Pressure - Implement Circuit - Travel Circuit
|
5076 psi
|
Machine Weight
|
Operating Weight Maximum
|
52911 lb
|
|
Operating Weight Minimum
|
44750 lb
|
Service Refill Capacities
|
Cooling System
|
10.6 gal (US)
|
|
Diesel Exhaust Fluid (DEF)
|
7.9 gal (US)
|
|
Engine Oil
|
3.4 gal (US)
|
|
Fuel Tank
|
124.2 gal (US)
|
|
Hydraulic System - Including Tank
|
71.3 gal (US)
|
|
Hydraulic Tank
|
52.8 gal (US)
|
Transmission
|
Creeper Speed - 1st Gear
|
3.4 mile/h
|
|
Creeper Speed - 2nd Gear
|
9.3 mile/h
|
|
Drawbar Pull
|
28551 lbf
|
|
Forward/Reverse - 1st Gear
|
5.6 mile/h
|
|
Forward/Reverse - 2nd Gear
|
18.6 mile/h
|
|
Maximum Gradeability
|
70%
|
Dimensions
|
Boom
|
VA 5.4m (17'10")
|
|
Counterweight Clearance
|
4.3 ft
|
|
Ground Clearance
|
1.25 ft
|
|
Shipping Height with Falling Object Guard
|
11 ft
|
|
Shipping Length
|
31.1 ft
|
|
Stick
|
2.9m (9'2")
|
|
Support Point
|
11.3 ft
|
|
Tail Swing Radius
|
9.2 ft
|
|
Wheel Base
|
9 ft
|
Working Ranges and Forces
|
Boom Type
|
VA 5.4m (17'10")
|
|
Bucket
|
GD 1.2 m³ (1.7 yd³)
|
|
Bucket Forces (ISO)
|
33946 lbf
|
|
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom
|
21.6 ft
|
|
Maximum Digging Depth
|
21.8 ft
|
|
Maximum Loading Height
|
24.7 ft
|
|
Reach at Ground Level
|
33.4 ft
|
|
Stick
|
2.9m (9'2")
|
|
Stick Forces (ISO)
|
23605 lbf
|
|
Vertical Wall Digging Depth
|
17.3 ft
|
working Ranges and Forces
Air Conditioning System
|
Note
|
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes.
|
